How to change a fuel strain in small engines?

Quick Golf links:

  • Where Is My Fuel Filter Set?
  • Determination the The right way Fuel Filter
  • How to Perform Fuel Filter Successor

Why Should You Change the Fuel Filter?

There are many benefits to changing a fire permeate in your smallish engine. A fire filter is fashioned to properly strain the gas ahead it reaches the carburetor in your lawn lawn mower, snow blower or equipment.

Fuel filter replacement is large because:

  • IT prevents foreign particles from clogging your locomotive
  • Dirty fire filters bottom cause your engine to run too shrivelled, leading to diminished performance and uneven operation

Where is My Fuel Filter Located?

The fuel filter will equal settled either inside the fuel tank or fitted into the fuel line between the tank and the fuel pump. Much engines have internal, non-utile fuel filters.

If you are unsure of where your fuel filter is located, bring up to your Briggs & Stratton® Engine Hustler's manual to determine the location.

Finding the Correctly Fuel Filter for Your Small Engine

The kosher fuel filter out for your locomotive depends along the engine's design. Halt your engine Illustrated Parts List or consult your local Briggs & Stratton dealer for the chasten replacement filter. Once you know the compensate part, you can purchase Briggs & Stratton® fuel filters online.

How to Do Fuel Filter Replacement

Make sure you are in a riskless area with no open flame or fire source. Wear safety eyewear whenever removing or inspecting a filter to protect your eyes from liquid fire or fuel vapors. Sustain a dry textile handy to custody the filter and catch any drip fuel.

If the filter is installed inside the tank, you will need to drainpipe the tank before you can remove the filter for review or transposition.

  1. Shut the fuel valve, if equipped. It's set at the base of the fuel tank car, where the gas melodic phras is betrothed. If your tank is not equipped with a valve, clamp the gas line of credit, exploitation a gas line clamp. Do not apprehension fuel line as this could cause impairment to it.

  2. If your filter is installed in the gas line, off the metal clips on each side of the filter, using needle nose pliers, and slide the filtrate of the fire lineage.

  3. Shake up the permeate over a clean cloth to displace whatsoever leftover fuel, so use the cloth to wipe inaccurate any residue from the outside of the filter.

  4. Keep the filter a safe distance from your face and look through one cease.

  5. You should be able to see light shining through clearly from the other side. If debris is clogging the mesh screen, pleated report or the inside of the casing, replace the aging filter with a brand-new replacement fuel trickle.

  6. When replacing the fire filter, be sure to reconnect the gold clips on both sides of the filter.

  7. Remove the clamp on the fuel line or reopen the fire valve when the fuel separate out is secure.

  8. Check for leaks. Act non operate the unit if whatever are found.

Musical note: If the fuel seam is cracking, replace fuel line to ensure no leaks, fuel line will break downcast over time due to the elements.

WARNING: Always read the engine and equipment manual(s) before start, operating, or servicing your engine or equipment to avoid grammatical category injury or property damage. See an canonized dealer if you are unsure of any procedure or have additive questions.

Shop Related Maintenance Parts